For other uses, see Computer (disambiguation).

"Computer technology" redirects here. For the company, see Computer Technology Limited.

Computer

A computer is a programmable machine designed to sequentially and automatically carry out a sequence of arithmetic or logical operations. The particular sequence of operations can be changed readily, allowing the computer to solve more than one kind of problem.

Conventionally a computer consists of some form of memory for data storage, at least one element that carries out arithmetic and logic operations, and a sequencing and control element that can change the order of operations based on the information that is stored. Peripheral devices allow information to be entered from external source, and allow the results of operations to be sent out.

A computer's processing unit executes series of instructions that make it read, manipulate and then store data. Conditional instructions change the sequence of instructions as a function of the current state of the machine or its environment.

The first electronic computers were developed in the mid-20th century (1940–1945). Originally, they were the size of a large room, consuming as much power as several hundred modern personal computers (PCs).^[1]

Modern computers based on integrated circuits are millions to billions of times more capable than the early machines, and occupy a fraction of the space.^[2] Simple computers are small enough to fit into mobile devices, mobile computers can be powered by small batteries. Personal computers in their various forms are icons of the Information Age and are what most people think of as "computers". However, theembedded computers found in many devices from MP3 players to fighter aircraft and from toys to industrial robots are the most numerous.

Contents  [hide] 1 History of computing 1.1 Limited-function early computers 1.2 First general-purpose computers 1.3 Stored-program architecture 1.4 Semiconductors and microprocessors 2 Programs 2.1 Stored program architecture 2.2 Bugs 2.3 Machine code 2.4 Higher-level languages and program design 3 Function 3.1 Control unit 3.2 Arithmetic/logic unit (ALU) 3.3 Memory 3.4 Input/output (I/O) 3.5 Multitasking 3.6 Multiprocessing 3.7 Networking and the Internet 4 Misconceptions 4.1 Required technology 4.2 Computer architecture paradigms 4.3 Limited-function computers 4.4 Virtual computers 5 Further topics 5.1 Artificial intelligence 5.2 Hardware 5.3 Software 5.4 Programming languages 5.5 Professions and organizations 6 See also 7 Notes 8 References 9 External links

History of computing

Main article: History of computing hardware

The first use of the word "computer" was recorded in 1613, referring to a person who carried out calculations, or computations, and the word continued with the same meaning until the middle of the 20th century. From the end of the 19th century onwards, the word began to take on its more familiar meaning, describing a machine that carries out computations.^[3]

Limited-function early computers

The Jacquard loom, on display at theMuseum of Science and Industry in Manchester, England, was one of the first programmable devices.

The history of the modern computer begins with two separate technologies—automated calculation and programmability—but no single device can be identified as the earliest computer, partly because of the inconsistent application of that term. A few devices are worth mentioning though, like some mechanical aids to computing, which were very successful and survived for centuries until the advent of the electronic calculator, like the Sumerian abacus, designed around 2500 BC^[4] which descendant won a speed competition against a modern desk calculating machine in Japan in 1946,^[5] the slide rules, invented in the 1620s, which were carried on fiveApollo space missions, including to the moon^[6] and arguably the astrolabe and the Antikythera mechanism, an ancient astronomical computer built by the Greeks around 80 BC.^[7] The Greek mathematician Hero of Alexandria (c. 10–70 AD) built a mechanical theater which performed a play lasting 10 minutes and was operated by a complex system of ropes and drums that might be considered to be a means of deciding which parts of the mechanism performed which actions and when.^[8] This is the essence of programmability.

Around the end of the tenth century, the French monk Gerbert d'Aurillac brought back from Spain the drawings of a machine invented by the Moors that answered Yes or No to the questions it was asked (binary arithmetic).^[9] Again in the thirteenth century, the monks Albertus Magnus andRoger Bacon built talking androids without any further development (Albertus Magnus complained that he had wasted forty years of his life when Thomas Aquinas, terrified by his machine, destroyed it).^[10] In the same century analog computers like the castle clock of Al-Jazari were invented.

In 1642, the Renaissance saw the invention of the mechanical calculator,^[11] a device that could perform all four arithmetic operations without relying on human intelligence.^[12] The mechanical calculator was at the root of the development of computers in two separate ways ; initially, it is in trying to develop more powerful and more flexible calculators^[13] that the computer was first theorized by Charles Babbage^[14][15] and then developed,^[16] leading to the development of mainframe computers in the 1960s, but also the microprocessor, which started the personal computer revolution, and which is now at the heart of all computer systems regardless of size or purpose,^[17] was invented serendipitously by Intel^[18] during the development of an electronic calculator, a direct descendant to the mechanical calculator.^[19]

First general-purpose computers

In 1801, Joseph Marie Jacquard made an improvement to the textile loom by introducing a series of punched paper cards as a template which allowed his loom to weave intricate patterns automatically. The resulting Jacquard loom was an important step in the development of computers because the use of punched cards to define woven patterns can be viewed as an early, albeit limited, form of programmability.

The Most Famous Image in the Early History of Computing^[20]

This portrait of Jacquard was woven in silk on a Jacquard loom and required 24,000 punched cards to create (1839). It was only produced to order. Charles Babbage owned one of these portraits ; it inspired him in using perforated cards in his analytical engine^[21]

It was the fusion of automatic calculation with programmability that produced the first recognizable computers. In 1837, Charles Babbage was the first to conceptualize and design a fully programmable mechanical computer, his analytical engine.^[22] Limited finances and Babbage's inability to resist tinkering with the design meant that the device was never completed ; nevertheless his son, Henry Babbage, completed a simplified version of the analytical engine's computing unit (the mill) in 1888. He gave a successful demonstration of its use in computing tables in 1906. This machine was given to the Science museum in South Kensington in 1910.

In the late 1880s, Herman Hollerith invented the recording of data on a machine readable medium. Prior uses of machine readable media, above, had been for control, not data. "After some initial trials with paper tape, he settled on punched cards ..."^[23] To process these punched cards he invented the tabulator, and the keypunch machines. These three inventions were the foundation of the modern information processing industry. Large-scale automated data processing of punched cards was performed for the 1890 United States Census by Hollerith's company, which later became the core of IBM. By the end of the 19th century a number of technologies that would later prove useful in the realization of practical computers had begun to appear: the punched card,Boolean algebra, the vacuum tube (thermionic valve) and the teleprinter.

During the first half of the 20th century, many scientific computing needs were met by increasingly sophisticated analog computers, which used a direct mechanical or electrical model of the problem as a basis for computation. However, these were not programmable and generally lacked the versatility and accuracy of modern digital computers.

Alan Turing is widely regarded to be the father of modern computer science. In 1936 Turing provided an influential formalisation of the concept of the algorithm and computation with theTuring machine, providing a blueprint for the electronic digital computer.^[24] Of his role in the creation of the modern computer, Time magazine in naming Turing one of the 100 most influentialpeople of the 20th century, states: "The fact remains that everyone who taps at a keyboard, opening a spreadsheet or a word-processing program, is working on an incarnation of a Turing machine".^[24]

The Zuse Z3, 1941, considered the world's first working programmable, fully automatic computing machine.

The ENIAC, which became operational in 1946, is considered to be the first general-purpose electronic computer.

EDSAC was one of the first computers to implement the stored program (von Neumann) architecture.

Die of an Intel 80486DX2 microprocessor(actual size: 12×6.75 mm) in its packaging.

The Atanasoff–Berry Computer (ABC) was among the first electronic digital binary computing devices. Conceived in 1937 by Iowa State College physics professor John Atanasoff, and built with the assistance of graduate student Clifford Berry,^[25] the machine was not programmable, being designed only to solve systems of linear equations. The computer did employ parallel computation. A 1973 court ruling in a patent dispute found that the patent for the 1946 ENIACcomputer derived from the Atanasoff–Berry Computer.

The inventor of the program-controlled computer was Konrad Zuse, who built the first working computer in 1941 and later in 1955 the first computer based on magnetic storage.^[26]

George Stibitz is internationally recognized as a father of the modern digital computer. While working at Bell Labs in November 1937, Stibitz invented and built a relay-based calculator he dubbed the "Model K" (for "kitchen table", on which he had assembled it), which was the first to use binary circuits to perform an arithmetic operation. Later models added greater sophistication including complex arithmetic and programmability.^[27]

A succession of steadily more powerful and flexible computing devices were constructed in the 1930s and 1940s, gradually adding the key features that are seen in modern computers. The use of digital electronics (largely invented by Claude Shannon in 1937) and more flexible programmability were vitally important steps, but defining one point along this road as "the first digital electronic computer" is difficult.^{Shannon 1940} Notable achievements include.

• Konrad Zuse's electromechanical "Z machines". The Z3 (1941) was the first working machine featuring binary arithmetic, including floating point arithmetic and a measure of programmability. In 1998 the Z3 was proved to be Turing complete, therefore being the world's first operational computer.^[28]
• The non-programmable Atanasoff–Berry Computer (commenced in 1937, completed in 1941) which used vacuum tube based computation, binary numbers, and regenerative capacitor memory. The use of regenerative memory allowed it to be much more compact than its peers (being approximately the size of a large desk or workbench), since intermediate results could be stored and then fed back into the same set of computation elements.
• The secret British Colossus computers (1943),^[29] which had limited programmability but demonstrated that a device using thousands of tubes could be reasonably reliable and electronically reprogrammable. It was used for breaking German wartime codes.
• The Harvard Mark I (1944), a large-scale electromechanical computer with limited programmability.^[30]
• The U.S. Army's Ballistic Research Laboratory ENIAC (1946), which used decimal arithmetic and is sometimes called the first general purpose electronic computer (since Konrad Zuse's Z3of 1941 used electromagnets instead of electronics). Initially, however, ENIAC had an inflexible architecture which essentially required rewiring to change its programming.

Stored-program architecture

Several developers of ENIAC, recognizing its flaws, came up with a far more flexible and elegant design, which came to be known as the "stored program architecture" or von Neumann architecture. This design was first formally described by John von Neumann in the paper First Draft of a Report on the EDVAC, distributed in 1945. A number of projects to develop computers based on the stored-program architecture commenced around this time, the first of these being completed in Great Britain. The first working prototype to be demonstrated was the Manchester Small-Scale Experimental Machine (SSEM or "Baby") in 1948. The Electronic Delay Storage Automatic Calculator (EDSAC), completed a year after the SSEM at Cambridge University, was the first practical, non-experimental implementation of the stored program design and was put to use immediately for research work at the university. Shortly thereafter, the machine originally described by von Neumann's paper—EDVAC—was completed but did not see full-time use for an additional two years.

Nearly all modern computers implement some form of the stored-program architecture, making it the single trait by which the word "computer" is now defined. While the technologies used in computers have changed dramatically since the first electronic, general-purpose computers of the 1940s, most still use the von Neumann architecture.

Beginning in the 1950s, Soviet scientists Sergei Sobolev and Nikolay Brusentsov conducted research on ternary computers, devices that operated on a base three numbering system of −1, 0, and 1 rather than the conventional binary numbering system upon which most computers are based. They designed the Setun, a functional ternary computer, at Moscow State University. The device was put into limited production in the Soviet Union, but supplanted by the more common binary architecture.

Semiconductors and microprocessors

Computers using vacuum tubes as their electronic elements were in use throughout the 1950s, but by the 1960s had been largely replaced by transistor-based machines, which were smaller, faster, cheaper to produce, required less power, and were more reliable. The first transistorised computer was demonstrated at the University of Manchester in 1953.^[31] In the 1970s, integrated circuit technology and the subsequent creation of microprocessors, such as the Intel 4004, further decreased size and cost and further increased speed and reliability of computers. By the late 1970s, many products such as video recorders contained dedicated computers called microcontrollers, and they started to appear as a replacement to mechanical controls in domestic appliances such as washing machines. The 1980s witnessed home computers and the now ubiquitous personal computer. With the evolution of the Internet, personal computers are becoming as common as the television and the telephone in the household^{[citation needed]}.

Modern smartphones are fully programmable computers in their own right, and as of 2009 may well be the most common form of such computers in existence^{[citation needed]}.

Programs

The defining feature of modern computers which distinguishes them from all other machines is that they can be programmed. That is to say that some type of instructions (the program) can be given to the computer, and it will carry process them. While some computers may have strange concepts "instructions" and "output" (see quantum computing), modern computers based on the von Neumann architecture are often have machine code in the form of an imperative programming language.

In practical terms, a computer program may be just a few instructions or extend to many millions of instructions, as do the programs forword processors and web browsers for example. A typical modern computer can execute billions of instructions per second (gigaflops) and rarely makes a mistake over many years of operation. Large computer programs consisting of several million instructions may take teams ofprogrammers years to write, and due to the complexity of the task almost certainly contain errors.

Stored program architecture

Main articles: Computer program and Computer programming

A 1970s punched card containing one line from aFORTRAN program. The card reads: "Z(1) = Y + W(1)" and is labelled "PROJ039" for identification purposes.

This section applies to most common RAM machine-based computers.

In most cases, computer instructions are simple: add one number to another, move some data from one location to another, send a message to some external device, etc. These instructions are read from the computer's memory and are generally carried out (executed) in the order they were given. However, there are usually specialized instructions to tell the computer to jump ahead or backwards to some other place in the program and to carry on executing from there. These are called "jump" instructions (or branches). Furthermore, jump instructions may be made to happen conditionally so that different sequences of instructions may be used depending on the result of some previous calculation or some external event. Many computers directly support subroutines by providing a type of jump that "remembers" the location it jumped from and another instruction to return to the instruction following that jump instruction.

Program execution might be likened to reading a book. While a person will normally read each word and line in sequence, they may at times jump back to an earlier place in the text or skip sections that are not of interest. Similarly, a computer may sometimes go back and repeat the instructions in some section of the program over and over again until some internal condition is met. This is called the flow of controlwithin the program and it is what allows the computer to perform tasks repeatedly without human intervention.

Comparatively, a person using a pocket calculator can perform a basic arithmetic operation such as adding two numbers with just a few button presses. But to add together all of the numbers from 1 to 1,000 would take thousands of button presses and a lot of time—with a near certainty of making a mistake. On the other hand, a computer may be programmed to do this with just a few simple instructions. For example:

mov #0, sum     ; set sum to 0
      mov #1, num     ; set num to 1
loop: add num, sum    ; add num to sum
      add #1, num     ; add 1 to num
      cmp num, #1000  ; compare num to 1000
      ble loop        ; if num <= 1000, go back to 'loop'
      halt            ; end of program. stop running

Once told to run this program, the computer will perform the repetitive addition task without further human intervention. It will almost never make a mistake and a modern PC can complete the task in about a millionth of a second.^[32]

Bugs

Main article: software bug

The actual first computer bug, a moth found trapped on a relay of the Harvard Mark II computer

Errors in computer programs are called "bugs". Bugs may be benign and not affect the usefulness of the program, or have only subtle effects. But in some cases they may cause the program to "hang"—become unresponsive to input such as mouse clicks or keystrokes, or to completely fail or "crash". Otherwise benign bugs may sometimes be harnessed for malicious intent by an unscrupulous user writing an "exploit"—code designed to take advantage of a bug and disrupt a computer's proper execution. Bugs are usually not the fault of the computer. Since computers merely execute the instructions they are given, bugs are nearly always the result of programmer error or an oversight made in the program's design.^[33]

Rear Admiral Grace Hopper is credited for having first used the term 'bugs' in computing after a dead moth was found shorting a relay of the Harvard Mark II computer in September 1947.^[34]

Machine code

In most computers, individual instructions are stored as machine code with each instruction being given a unique number (its operation code or opcode for short). The command to add two numbers together would have one opcode, the command to multiply them would have a different opcode and so on. The simplest computers are able to perform any of a handful of different instructions; the more complex computers have several hundred to choose from—each with a unique numerical code. Since the computer's memory is able to store numbers, it can also store the instruction codes. This leads to the important fact that entire programs (which are just lists of these instructions) can be represented as lists of numbers and can themselves be manipulated inside the computer in the same way as numeric data. The fundamental concept of storing programs in the computer's memory alongside the data they operate on is the crux of the von Neumann, or stored program, architecture. In some cases, a computer might store some or all of its program in memory that is kept separate from the data it operates on. This is called the Harvard architecture after theHarvard Mark I computer. Modern von Neumann computers display some traits of the Harvard architecture in their designs, such as in CPU caches.

While it is possible to write computer programs as long lists of numbers (machine language) and while this technique was used with many early computers,^[35] it is extremely tedious and potentially error-prone to do so in practice, especially for complicated programs. Instead, each basic instruction can be given a short name that is indicative of its function and easy to remember—a mnemonic such as ADD, SUB, MULT or JUMP. These mnemonics are collectively known as a computer's assembly language. Converting programs written in assembly language into something the computer can actually understand (machine language) is usually done by a computer program called an assembler. Machine languages and the assembly languages that represent them (collectively termed low-level programming languages) tend to be unique to a particular type of computer. For instance, an ARM architecture computer (such as may be found in a PDA or a hand-held videogame) cannot understand the machine language of an Intel Pentium or the AMD Athlon 64 computer that might be in a PC.^[36]

Higher-level languages and program design

Though considerably easier than in machine language, writing long programs in assembly language is often difficult and is also error prone. Therefore, most practical programs are written in more abstract high-level programming languages that are able to express the needs of theprogrammer more conveniently (and thereby help reduce programmer error). High level languages are usually "compiled" into machine language (or sometimes into assembly language and then into machine language) using another computer program called a compiler.^[37]High level languages are less related to the workings of the target computer than assembly language, and more related to the language and structure of the problem(s) to be solved by the final program. It is therefore often possible to use different compilers to translate the same high level language program into the machine language of many different types of computer. This is part of the means by which software like video games may be made available for different computer architectures such as personal computers and various video game consoles.

The task of developing large software systems presents a significant intellectual challenge. Producing software with an acceptably high reliability within a predictable schedule and budget has historically been difficult; the academic and professional discipline of software engineering concentrates specifically on this challenge.

Function

Main articles: Central processing unit and Microprocessor

A general purpose computer has four main components: the arithmetic logic unit (ALU), the control unit, the memory, and the input and output devices (collectively termed I/O). These parts are interconnected by busses, often made of groups of wires.

Inside each of these parts are thousands to trillions of small electrical circuits which can be turned off or on by means of an electronic switch. Each circuit represents a bit (binary digit) of information so that when the circuit is on it represents a "1", and when off it represents a "0" (in positive logic representation). The circuits are arranged in logic gates so that one or more of the circuits may control the state of one or more of the other circuits.

The control unit, ALU, registers, and basic I/O (and often other hardware closely linked with these) are collectively known as a central processing unit (CPU). Early CPUs were composed of many separate components but since the mid-1970s CPUs have typically been constructed on a single integrated circuit called a microprocessor.

Control unit

Main articles: CPU design and Control unit

Diagram showing how a particular MIPS architecture instruction would be decoded by the control system.

The control unit (often called a control system or central controller) manages the computer's various components; it reads and interprets (decodes) the program instructions, transforming them into a series of control signals which activate other parts of the computer.^[38] Control systems in advanced computers may change the order of some instructions so as to improve performance.

A key component common to all CPUs is the program counter, a special memory cell (aregister) that keeps track of which location in memory the next instruction is to be read from.^[39]

The control system's function is as follows—note that this is a simplified description, and some of these steps may be performed concurrently or in a different order depending on the type of CPU:

1. Read the code for the next instruction from the cell indicated by the program counter.
2. Decode the numerical code for the instruction into a set of commands or signals for each of the other systems.
3. Increment the program counter so it points to the next instruction.
4. Read whatever data the instruction requires from cells in memory (or perhaps from an input device). The location of this required data is typically stored within the instruction code.
5. Provide the necessary data to an ALU or register.
6. If the instruction requires an ALU or specialized hardware to complete, instruct the hardware to perform the requested operation.
7. Write the result from the ALU back to a memory location or to a register or perhaps an output device.
8. Jump back to step (1).

Since the program counter is (conceptually) just another set of memory cells, it can be changed by calculations done in the ALU. Adding 100 to the program counter would cause the next instruction to be read from a place 100 locations further down the program. Instructions that modify the program counter are often known as "jumps" and allow for loops (instructions that are repeated by the computer) and often conditional instruction execution (both examples of control flow).

It is noticeable that the sequence of operations that the control unit goes through to process an instruction is in itself like a short computer program—and indeed, in some more complex CPU designs, there is another yet smaller computer called a microsequencer that runs amicrocode program that causes all of these events to happen.

Arithmetic/logic unit (ALU)

Main article: Arithmetic logic unit

The ALU is capable of performing two classes of operations: arithmetic and logic.^[40]

The set of arithmetic operations that a particular ALU supports may be limited to adding and subtracting or might include multiplying or dividing, trigonometry functions (sine, cosine, etc.) and square roots. Some can only operate on whole numbers (integers) whilst others usefloating point to represent real numbers—albeit with limited precision. However, any computer that is capable of performing just the simplest operations can be programmed to break down the more complex operations into simple steps that it can perform. Therefore, any computer can be programmed to perform any arithmetic operation—although it will take more time to do so if its ALU does not directly support the operation. An ALU may also compare numbers and return boolean truth values (true or false) depending on whether one is equal to, greater than or less than the other ("is 64 greater than 65?").

Logic operations involve Boolean logic: AND, OR, XOR and NOT. These can be useful both for creating complicated conditional statementsand processing boolean logic.

Superscalar computers may contain multiple ALUs so that they can process several instructions at the same time.^[41] Graphics processorsand computers with SIMD and MIMD features often provide ALUs that can perform arithmetic on vectors and matrices.

Memory

Main article: Computer data storage

Magnetic core memory was the computer memory of choice throughout the 1960s, until it was replaced by semiconductor memory.

A computer's memory can be viewed as a list of cells into which numbers can be placed or read. Each cell has a numbered "address" and can store a single number. The computer can be instructed to "put the number 123 into the cell numbered 1357" or to "add the number that is in cell 1357 to the number that is in cell 2468 and put the answer into cell 1595". The information stored in memory may represent practically anything. Letters, numbers, even computer instructions can be placed into memory with equal ease. Since the CPU does not differentiate between different types of information, it is the software's responsibility to give significance to what the memory sees as nothing but a series of numbers.

In almost all modern computers, each memory cell is set up to store binary numbers in groups of eight bits (called a byte). Each byte is able to represent 256 different numbers (2^8 = 256); either from 0 to 255 or −128 to +127. To store larger numbers, several consecutive bytes may be used (typically, two, four or eight). When negative numbers are required, they are usually stored intwo's complement notation. Other arrangements are possible, but are usually not seen outside of specialized applications or historical contexts. A computer can store any kind of information in memory if it can be represented numerically. Modern computers have billions or even trillions of bytes of memory.

The CPU contains a special set of memory cells called registers that can be read and written to much more rapidly than the main memory area. There are typically between two and one hundred registers depending on the type of CPU. Registers are used for the most frequently needed data items to avoid having to access main memory every time data is needed. As data is constantly being worked on, reducing the need to access main memory (which is often slow compared to the ALU and control units) greatly increases the computer's speed.

Computer main memory comes in two principal varieties: random-access memory or RAM and read-only memory or ROM. RAM can be read and written to anytime the CPU commands it, but ROM is pre-loaded with data and software that never changes, so the CPU can only read from it. ROM is typically used to store the computer's initial start-up instructions. In general, the contents of RAM are erased when the power to the computer is turned off, but ROM retains its data indefinitely. In a PC, the ROM contains a specialized program called the BIOSthat orchestrates loading the computer's operating system from the hard disk drive into RAM whenever the computer is turned on or reset. Inembedded computers, which frequently do not have disk drives, all of the required software may be stored in ROM. Software stored in ROM is often called firmware, because it is notionally more like hardware than software. Flash memory blurs the distinction between ROM and RAM, as it retains its data when turned off but is also rewritable. It is typically much slower than conventional ROM and RAM however, so its use is restricted to applications where high speed is unnecessary.^[42]

In more sophisticated computers there may be one or more RAM cache memories which are slower than registers but faster than main memory. Generally computers with this sort of cache are designed to move frequently needed data into the cache automatically, often without the need for any intervention on the programmer's part.

Input/output (I/O)

Main article: Input/output

Hard disk drives are common storage devices used with computers.

I/O is the means by which a computer exchanges information with the outside world.^[43] Devices that provide input or output to the computer are called peripherals.^[44] On a typical personal computer, peripherals include input devices like the keyboard and mouse, and output devices such as the display and printer. Hard disk drives, floppy disk drives and optical disc drives serve as both input and output devices. Computer networking is another form of I/O.

Often, I/O devices are complex computers in their own right with their own CPU and memory. Agraphics processing unit might contain fifty or more tiny computers that perform the calculations necessary to display 3D graphics^{[citation needed]}. Modern desktop computers contain many smaller computers that assist the main CPU in performing I/O.

Multitasking

Main article: Computer multitasking

While a computer may be viewed as running one gigantic program stored in its main memory, in some systems it is necessary to give the appearance of running several programs simultaneously. This is achieved by multitasking i.e. having the computer switch rapidly between running each program in turn.^[45]

One means by which this is done is with a special signal called an interrupt which can periodically cause the computer to stop executing instructions where it was and do something else instead. By remembering where it was executing prior to the interrupt, the computer can return to that task later. If several programs are running "at the same time", then the interrupt generator might be causing several hundred interrupts per second, causing a program switch each time. Since modern computers typically execute instructions several orders of magnitude faster than human perception, it may appear that many programs are running at the same time even though only one is ever executing in any given instant. This method of multitasking is sometimes termed "time-sharing" since each program is allocated a "slice" of time in turn.^[46]

Before the era of cheap computers, the principal use for multitasking was to allow many people to share the same computer.

Seemingly, multitasking would cause a computer that is switching between several programs to run more slowly — in direct proportion to the number of programs it is running. However, most programs spend much of their time waiting for slow input/output devices to complete their tasks. If a program is waiting for the user to click on the mouse or press a key on the keyboard, then it will not take a "time slice" until the event it is waiting for has occurred. This frees up time for other programs to execute so that many programs may be run at the same time without unacceptable speed loss.

Multiprocessing

Main article: Multiprocessing

Cray designed many supercomputers that used multiprocessing heavily.

Some computers are designed to distribute their work across several CPUs in a multiprocessing configuration, a technique once employed only in large and powerful machines such assupercomputers, mainframe computers and servers. Multiprocessor and multi-core (multiple CPUs on a single integrated circuit) personal and laptop computers are now widely available, and are being increasingly used in lower-end markets as a result.

Supercomputers in particular often have highly unique architectures that differ significantly from the basic stored-program architecture and from general purpose computers.^[47] They often feature thousands of CPUs, customized high-speed interconnects, and specialized computing hardware. Such designs tend to be useful only for specialized tasks due to the large scale of program organization required to successfully utilize most of the available resources at once. Supercomputers usually see usage in large-scale simulation, graphics rendering, andcryptography applications, as well as with other so-called "embarrassingly parallel" tasks.

Networking and the Internet

Main articles: Computer networking and Internet

Visualization of a portion of the routes on the Internet.

Computers have been used to coordinate information between multiple locations since the 1950s. The U.S. military's SAGE system was the first large-scale example of such a system, which led to a number of special-purpose commercial systems like Sabre.^[48]

In the 1970s, computer engineers at research institutions throughout the United States began to link their computers together using telecommunications technology. This effort was funded by ARPA (now DARPA), and the computer network that it produced was called the ARPANET.^[49]The technologies that made the Arpanet possible spread and evolved.

In time, the network spread beyond academic and military institutions and became known as theInternet. The emergence of networking involved a redefinition of the nature and boundaries of the computer. Computer operating systems and applications were modified to include the ability to define and access the resources of other computers on the network, such as peripheral devices, stored information, and the like, as extensions of the resources of an individual computer. Initially these facilities were available primarily to people working in high-tech environments, but in the 1990s the spread of applications like e-mail and the World Wide Web, combined with the development of cheap, fast networking technologies like Ethernet and ADSL saw computer networking become almost ubiquitous. In fact, the number of computers that are networked is growing phenomenally. A very large proportion of personal computers regularly connect to the Internet to communicate and receive information. "Wireless" networking, often utilizing mobile phone networks, has meant networking is becoming increasingly ubiquitous even in mobile computing environments.

Misconceptions

A computer does not need to be electric, nor even have a processor, nor RAM, nor even hard disk. The minimal definition of a computer is anything that transforms information in a purposeful way.^{[citation needed]} However the traditional definition of a computer is a device having memory, mass storage, processor (CPU), and Input & Output devices.^[50] Anything less would be a simple processor.

Required technology

Main article: Unconventional computing

Computational systems as flexible as a personal computer can be built out of almost anything. For example, a computer can be made out ofbilliard balls (billiard ball computer); this is an unintuitive and pedagogical example that a computer can be made out of almost anything. More realistically, modern computers are made out of transistors made of photolithographed semiconductors.

Historically, computers evolved from mechanical computers and eventually from vacuum tubes to transistors.

There is active research to make computers out of many promising new types of technology, such as optical computing, DNA computers,neural computers, and quantum computers. Some of these can easily tackle problems that modern computers cannot (such as how quantum computers can break some modern encryption algorithms by quantum factoring).

Computer architecture paradigms

Some different paradigms of how to build a computer from the ground-up:

RAM machines

These are the types of computers with a CPU, computer memory, etc., which understand basic instructions in a machine language. The concept evolved from the Turing machine.

Brains

Brains are massively parallel processors made of neurons, wired in intricate patterns, that communicate via electricity andneurotransmitter chemicals.

Programming languages

Such as the lambda calculus, or modern programming languages, are virtual computers built on top of other computers.

Cellular automata

For example, the game of Life can create "gliders" and "loops" and other constructs that transmit information; this paradigm can be applied to DNA computing, chemical computing, etc.

Groups and committees

The linking of multiple computers (brains) is itself a computer

Logic gates are a common abstraction which can apply to most of the above digital or analog paradigms.

The ability to store and execute lists of instructions called programs makes computers extremely versatile, distinguishing them fromcalculators. The Church–Turing thesis is a mathematical statement of this versatility: any computer with a minimum capability (being Turing-complete) is, in principle, capable of performing the same tasks that any other computer can perform. Therefore any type of computer (netbook, supercomputer, cellular automaton, etc.) is able to perform the same computational tasks, given enough time and storage capacity.

Limited-function computers

Conversely, a computer which is limited in function (one that is not "Turing-complete") cannot simulate arbitrary things. For example, simplefour-function calculators cannot simulate a real computer without human intervention. As a more complicated example, without the ability toprogram a gaming console, it can never accomplish what a programmable calculator from the 1990s could (given enough time); the system as a whole is not Turing-complete, even though it contains a Turing-complete component (the microprocessor). Living organisms (the body, not the brain) are also limited-function computers designed to make copies of themselves; they cannot be reprogrammed without genetic engineering.

Virtual computers

A "computer" is commonly considered to be a physical device. However, one can create a computer program which describes how to run a different computer, i.e. "simulating a computer in a computer". Not only is this a constructive proof of the Church-Turing thesis, but is also extremely common in all modern computers. For example, some programming languages use something called an interpreter, which is a simulated computer built on top of the basic computer; this allows programmers to write code (computer input) in a different language than the one understood by the base computer (the alternative is to use a compiler). Additionally, virtual machines are simulated computers which virtually replicate a physical computer in software, and are very commonly used by IT. Virtual machines are also a common technique used to create emulators, such game console emulators.

Further topics

• Glossary of computers

Artificial intelligence

A computer will solve problems in exactly the way they are programmed to, without regard to efficiency nor alternative solutions nor possible shortcuts nor possible errors in the code. Computer programs which learn and adapt are part of the emerging field of artificial intelligence andmachine learning.

Hardware

The term hardware covers all of those parts of a computer that are tangible objects. Circuits, displays, power supplies, cables, keyboards, printers and mice are all hardware.

History of computing hardware

First Generation (Mechanical/Electromechanical)	Calculators	Antikythera mechanism, Difference engine, Norden bombsight
	Programmable Devices	Jacquard loom, Analytical engine, Harvard Mark I, Z3
Second Generation (Vacuum Tubes)	Calculators	Atanasoff–Berry Computer, IBM 604, UNIVAC 60, UNIVAC 120
	Programmable Devices	Colossus, ENIAC, Manchester Small-Scale Experimental Machine,EDSAC, Manchester Mark 1, Ferranti Pegasus, Ferranti Mercury,CSIRAC, EDVAC, UNIVAC I, IBM 701, IBM 702, IBM 650, Z22
Third Generation (Discrete transistors and SSI, MSI, LSIIntegrated circuits)	Mainframes	IBM 7090, IBM 7080, IBM System/360, BUNCH
	Minicomputer	PDP-8, PDP-11, IBM System/32, IBM System/36
Fourth Generation (VLSI integrated circuits)	Minicomputer	VAX, IBM System i
	4-bit microcomputer	Intel 4004, Intel 4040
	8-bit microcomputer	Intel 8008, Intel 8080, Motorola 6800, Motorola 6809, MOS Technology 6502, Zilog Z80
	16-bit microcomputer	Intel 8088, Zilog Z8000, WDC 65816/65802
	32-bit microcomputer	Intel 80386, Pentium, Motorola 68000, ARM architecture
	64-bit microcomputer[51]	Alpha, MIPS, PA-RISC, PowerPC, SPARC, x86-64
	Embedded computer	Intel 8048, Intel 8051
	Personal computer	Desktop computer, Home computer, Laptop computer, Personal digital assistant (PDA), Portable computer, Tablet PC, Wearable computer
Theoretical/experimental	Quantum computer, Chemical computer, DNA computing, Optical computer, Spintronics based computer

Other Hardware Topics

Peripheral device(Input/output)	Input	Mouse, Keyboard, Joystick, Image scanner, Webcam, Graphics tablet,Microphone
	Output	Monitor, Printer, Loudspeaker
	Both	Floppy disk drive, Hard disk drive, Optical disc drive, Teleprinter
Computer busses	Short range	RS-232, SCSI, PCI, USB
	Long range (Computer networking)	Ethernet, ATM, FDDI

Software

Main article: Computer software

Software refers to parts of the computer which do not have a material form, such as programs, data, protocols, etc. When software is stored in hardware that cannot easily be modified (such as BIOS ROM in an IBM PC compatible), it is sometimes called "firmware" to indicate that it falls into an uncertain area somewhere between hardware and software.

Computer software

Operating system	Unix and BSD	UNIX System V, IBM AIX, HP-UX, Solaris (SunOS), IRIX, List of BSD operating systems
	GNU/Linux	List of Linux distributions, Comparison of Linux distributions
	Microsoft Windows	Windows 95, Windows 98, Windows NT, Windows 2000, Windows XP, Windows Vista, Windows 7
	DOS	86-DOS (QDOS), PC-DOS, MS-DOS, DR-DOS, FreeDOS
	Mac OS	Mac OS classic, Mac OS X
	Embedded andreal-time	List of embedded operating systems
	Experimental	Amoeba, Oberon/Bluebottle, Plan 9 from Bell Labs
Library	Multimedia	DirectX, OpenGL, OpenAL
	Programming library	C standard library, Standard Template Library
Data	Protocol	TCP/IP, Kermit, FTP, HTTP, SMTP
	File format	HTML, XML, JPEG, MPEG, PNG
User interface	Graphical user interface (WIMP)	Microsoft Windows, GNOME, KDE, QNX Photon, CDE, GEM, Aqua
	Text-based user interface	Command-line interface, Text user interface
Application	Office suite	Word processing, Desktop publishing, Presentation program, Database management system, Scheduling & Time management, Spreadsheet, Accounting software
	Internet Access	Browser, E-mail client, Web server, Mail transfer agent, Instant messaging
	Design and manufacturing	Computer-aided design, Computer-aided manufacturing, Plant management, Robotic manufacturing, Supply chain management
	Graphics	Raster graphics editor, Vector graphics editor, 3D modeler, Animation editor, 3D computer graphics,Video editing, Image processing
	Audio	Digital audio editor, Audio playback, Mixing, Audio synthesis, Computer music
	Software engineering	Compiler, Assembler, Interpreter, Debugger, Text editor, Integrated development environment, Software performance analysis, Revision control, Software configuration management
	Educational	Edutainment, Educational game, Serious game, Flight simulator
	Games	Strategy, Arcade, Puzzle, Simulation, First-person shooter, Platform, Massively multiplayer, Interactive fiction
	Misc	Artificial intelligence, Antivirus software, Malware scanner, Installer/Package management systems, File manager

Programming languages

Main article: Programming language

Programming languages provide various ways of specifying programs for computers to run. Unlike natural languages, programming languages are designed to permit no ambiguity and to be concise. They are purely written languages and are often difficult to read aloud. They are generally either translated into machine code by a compiler or an assembler before being run, or translated directly at run time by an interpreter. Sometimes programs are executed by a hybrid method of the two techniques. There are thousands of different programming languages—some intended to be general purpose, others useful only for highly specialized applications.

Programming languages

Lists of programming languages	Timeline of programming languages, List of programming languages by category, Generational list of programming languages, List of programming languages, Non-English-based programming languages
Commonly used Assembly languages	ARM, MIPS, x86
Commonly used high-level programming languages	Ada, BASIC, C, C++, C#, COBOL, Fortran, Java, Lisp, Pascal, Object Pascal
Commonly used Scripting languages	Bourne script, JavaScript, Python, Ruby, PHP, Perl

Professions and organizations

As the use of computers has spread throughout society, there are an increasing number of careers involving computers.

Computer-related professions

Hardware-related	Electrical engineering, Electronic engineering, Computer engineering, Telecommunications engineering, Optical engineering,Nanoengineering
Software-related	Computer science, Desktop publishing, Human–computer interaction, Information technology, Information systems,Computational science, Software engineering, Video game industry, Web design

The need for computers to work well together and to be able to exchange information has spawned the need for many standards organizations, clubs and societies of both a formal and informal nature.

Organizations

Standards groups	ANSI, IEC, IEEE, IETF, ISO, W3C
Professional Societies	ACM, AIS, IET, IFIP, BCS
Free/Open source software groups	Free Software Foundation, Mozilla Foundation, Apache Software Foundation

See also

Information technology portal

• Computability theory
• Computer security
• Computer insecurity
• List of computer term etymologies
• List of fictional computers
• Pulse computation

Notes

1. ^ In 1946, ENIAC required an estimated 174 kW. By comparison, a modern laptop computer may use around 30 W; nearly six thousand times less. "Approximate Desktop & Notebook Power Usage". University of Pennsylvania. Retrieved 2009-06-20.
2. ^ Early computers such as Colossus and ENIAC were able to process between 5 and 100 operations per second. A modern "commodity" microprocessor (as of 2007) can process billions of operations per second, and many of these operations are more complicated and useful than early computer operations. "Intel Core2 Duo Mobile Processor: Features". Intel Corporation. Retrieved 2009-06-20.
3. ^ computer, n.. Oxford English Dictionary (2 ed.). Oxford University Press. 1989. Retrieved 2009-04-10
4. ^ * Ifrah, Georges (2001). The Universal History of Computing: From the Abacus to the Quantum Computer. New York: John Wiley & Sons. ISBN 0471396710. From 2700 to 2300 BC, Georges Ifrah, pp.11
5. ^ Berkeley, Edmund (1949). Giant Brains, or Machines That Think. John Wiley & Sons. pp. 19. Edmund Berkeley
6. ^ According to advertising on Pickett's N600 slide rule boxes."Pickett Apollo Box Scans". Copland.udel.edu. Retrieved 2010-02-20.
7. ^ "Discovering How Greeks Computed in 100 B.C.". The New York Times. 31 July 2008. Retrieved 27 March 2010.
8. ^ "Heron of Alexandria". Retrieved 2008-01-15.
9. ^ Felt, Dorr E. (1916). Mechanical arithmetic, or The history of the counting machine. Chicago: Washington Institute. pp. 8. Dorr E. Felt
10. ^ "Speaking machines". The parlour review, Philadelphia 1 (3). January 20, 1838. Retrieved October 11, 2010.
11. ^ Felt, Dorr E. (1916). Mechanical arithmetic, or The history of the counting machine. Chicago: Washington Institute. pp. 10. Dorr E. Felt
12. ^ "Pascal and Leibnitz, in the seventeenth century, and Diderot at a later period, endeavored to construct a machine which might serve as a substitute for human intelligence in the combination of figures" The Gentleman's magazine, Volume 202, p.100
13. ^ Babbage's Difference engine in 1823 and his Analytical enginein the mid 1830s
14. ^ "It is reasonable to inquire, therefore, whether it is possible to devise a machine which will do for mathematical computation what the automatic lathe has done for engineering. The first suggestion that such a machine could be made came more than a hundred years ago from the mathematician Charles Babbage. Babbage's ideas have only been properly appreciated in the last ten years, but we now realize that he understood clearly all the fundamental principles which are embodied in modern digital computers" Faster than thought, edited by B. V. Bowden, 1953, Pitman publishing corporation
15. ^ "...Among this extraordinary galaxy of talent Charles Babbage appears to be one of the most remarkable of all. Most of his life he spent in an entirely unsuccessful attempt to make a machine which was regarded by his contemporaries as utterly preposterous, and his efforts were regarded as futile, time-consuming and absurd. In the last decade or so we have learnt how his ideas can be embodied in a modern digital computer. He understood more about the logic of these machines than anyone else in the world had learned until after the end of the last war" Foreword, Irascible Genius, Charles Babbage, inventor by Maboth Moseley, 1964, London, Hutchinson
16. ^ In the proposal that Aiken gave IBM in 1937 while requesting funding for the Harvard Mark I we can read: "Few calculating machines have been designed strictly for application to scientific investigations, the notable exceptions being those of Charles Babbage and others who followed him....After abandoning the difference engine, Babbage devoted his energy to the design and construction of an analytical engine of far higher powers than the difference engine....Since the time of Babbage, the development ofcalculating machinery has continued at an increasing rate."Howard Aiken, Proposed automatic calculating machine, reprinted in: The origins of Digital computers, Selected Papers, Edited by Brian Randell, 1973, ISBN 3-540-06169-X
17. ^ "Parallel processors composed of these high-performance microprocessors are becoming the supercomputing technology of choice for scientific and engineering applications", 1993,"Microprocessors: From Desktops to Supercomputers". Science Magazine. Retrieved 2011-04-23.
18. ^ Intel Museum - The 4004, Big deal then, Big deal now
19. ^ Please read Sumlock ANITA calculator#History of ANITA calculators
20. ^ From cave paintings to the internet HistoryofScience.com
21. ^ See: Anthony Hyman, ed., Science and Reform: Selected Works of Charles Babbage (Cambridge, England: Cambridge University Press, 1989), page 298. It is in the collection of the Science Museum in London, England. (Delve (2007), page 99.)
22. ^ The analytical engine should not be confused with Babbage'sdifference engine which was a non-programmable mechanical calculator.
23. ^ "Columbia University Computing History: Herman Hollerith". Columbia.edu. Retrieved 2010-12-11.
24. ^ ^a b "Alan Turing – Time 100 People of the Century". Time Magazine. Retrieved 2009-06-13. "The fact remains that everyone who taps at a keyboard, opening a spreadsheet or a word-processing program, is working on an incarnation of a Turing machine"
25. ^ "Atanasoff-Berry Computer". Retrieved 2010-11-20.
26. ^ "Spiegel: The inventor of the computer's biography was published". Spiegel.de. 2009-09-28. Retrieved 2010-12-11.
27. ^ "Inventor Profile: George R. Stibitz". National Inventors Hall of Fame Foundation, Inc..
28. ^ Rojas, R. (1998). "How to make Zuse's Z3 a universal computer". IEEE Annals of the History of Computing 20 (3): 51–54.doi:10.1109/85.707574.
29. ^ B. Jack Copeland, ed., Colossus: The Secrets of Bletchley Park's Codebreaking Computers, Oxford University Press, 2006
30. ^ "Robot Mathematician Knows All The Answers", October 1944, Popular Science. Books.google.com. Retrieved 2010-12-11.
31. ^ Lavington 1998, p. 37
32. ^ This program was written similarly to those for the PDP-11minicomputer and shows some typical things a computer can do. All the text after the semicolons are comments for the benefit of human readers. These have no significance to the computer and are ignored. (Digital Equipment Corporation 1972)
33. ^ It is not universally true that bugs are solely due to programmer oversight. Computer hardware may fail or may itself have a fundamental problem that produces unexpected results in certain situations. For instance, the Pentium FDIV bug caused some Intelmicroprocessors in the early 1990s to produce inaccurate results for certain floating point division operations. This was caused by a flaw in the microprocessor design and resulted in a partial recall of the affected devices.
34. ^ Taylor, Alexander L., III (1984-04-16). "The Wizard Inside the Machine". TIME. Retrieved 2007-02-17.
35. ^ Even some later computers were commonly programmed directly in machine code. Some minicomputers like the DEC PDP-8 could be programmed directly from a panel of switches. However, this method was usually used only as part of the bootingprocess. Most modern computers boot entirely automatically by reading a boot program from some non-volatile memory.
36. ^ However, there is sometimes some form of machine language compatibility between different computers. An x86-64 compatible microprocessor like the AMD Athlon 64 is able to run most of the same programs that an Intel Core 2 microprocessor can, as well as programs designed for earlier microprocessors like the IntelPentiums and Intel 80486. This contrasts with very early commercial computers, which were often one-of-a-kind and totally incompatible with other computers.
37. ^ High level languages are also often interpreted rather than compiled. Interpreted languages are translated into machine code on the fly, while running, by another program called an interpreter.
38. ^ The control unit's role in interpreting instructions has varied somewhat in the past. Although the control unit is solely responsible for instruction interpretation in most modern computers, this is not always the case. Many computers include some instructions that may only be partially interpreted by the control system and partially interpreted by another device. This is especially the case with specialized computing hardware that may be partially self-contained. For example, EDVAC, one of the earliest stored-program computers, used a central control unit that only interpreted four instructions. All of the arithmetic-related instructions were passed on to its arithmetic unit and further decoded there.
39. ^ Instructions often occupy more than one memory address, so the program counters usually increases by the number of memory locations required to store one instruction.
40. ^ David J. Eck (2000). The Most Complex Machine: A Survey of Computers and Computing. A K Peters, Ltd.. p. 54.ISBN 9781568811284.
41. ^ Erricos John Kontoghiorghes (2006). Handbook of Parallel Computing and Statistics. CRC Press. p. 45.ISBN 9780824740672.
42. ^ Flash memory also may only be rewritten a limited number of times before wearing out, making it less useful for heavy random access usage. (Verma & Mielke 1988)
43. ^ Donald Eadie (1968). Introduction to the Basic Computer. Prentice-Hall. p. 12.
44. ^ Arpad Barna; Dan I. Porat (1976). Introduction to Microcomputers and the Microprocessors. Wiley. p. 85. ISBN 9780471050513.
45. ^ Jerry Peek; Grace Todino, John Strang (2002). Learning the UNIX Operating System: A Concise Guide for the New User. O'Reilly. p. 130. ISBN 9780596002619.
46. ^ Gillian M. Davis (2002). Noise Reduction in Speech Applications. CRC Press. p. 111. ISBN 9780849309496.
47. ^ However, it is also very common to construct supercomputers out of many pieces of cheap commodity hardware; usually individual computers connected by networks. These so-calledcomputer clusters can often provide supercomputer performance at a much lower cost than customized designs. While custom architectures are still used for most of the most powerful supercomputers, there has been a proliferation of cluster computers in recent years. (TOP500 2006)
48. ^ Agatha C. Hughes (2000). Systems, Experts, and Computers.MIT Press. p. 161. ISBN 9780262082853. "The experience of SAGE helped make possible the first truly large-scale commercial real-time network: the SABRE computerized airline reservations system..."
49. ^ "A Brief History of the Internet". Internet Society. Retrieved 2008-09-20.
50. ^ "What is a computer?". Webopedia. Retrieved 25 February 2011.
51. ^ Most major 64-bit instruction set architectures are extensions of earlier designs. All of the architectures listed in this table, except for Alpha, existed in 32-bit forms before their 64-bit incarnations were introduced.

References

• ^a Kempf, Karl (1961). Historical Monograph: Electronic Computers Within the Ordnance Corps. Aberdeen Proving Ground (United States Army).
• ^a Phillips, Tony (2000). "The Antikythera Mechanism I". American Mathematical Society. Retrieved 2006-04-05.
• ^a Shannon, Claude Elwood (1940). A symbolic analysis of relay and switching circuits. Massachusetts Institute of Technology.
• Digital Equipment Corporation (1972) (PDF). PDP-11/40 Processor Handbook. Maynard, MA: Digital Equipment Corporation.
• Verma, G.; Mielke, N. (1988). Reliability performance of ETOX based flash memories. IEEE International Reliability Physics Symposium.
• Meuer, Hans; Strohmaier, Erich; Simon, Horst; Dongarra, Jack (2006-11-13). "Architectures Share Over Time". TOP500. Retrieved 2006-11-27.
• Lavington, Simon (1998). A History of Manchester Computers (2 ed.). Swindon: The British Computer Society. ISBN 0902505018
• Stokes, Jon (2007). Inside the Machine: An Illustrated Introduction to Microprocessors and Computer Architecture. San Francisco: No Starch Press. ISBN 978-1-59327-104-6.
• Felt, Dorr E. (1916). Mechanical arithmetic, or The history of the counting machine. Chicago: Washington Institute.
• Ifrah, Georges (2001). The Universal History of Computing: From the Abacus to the Quantum Computer. New York: John Wiley & Sons.ISBN 0471396710.
• Berkeley, Edmund (1949). Giant Brains, or Machines That Think. John Wiley & Sons.

External links

Find more about Computer on Wikipedia'ssister projects:
	Definitions from Wiktionary
	Images and media from Commons
	Learning resources from Wikiversity
	News stories from Wikinews
	Quotations from Wikiquote
	Source texts from Wikisource
	Textbooks from Wikibooks